How To Use Kleener's Choice

Step 1 - Pre-wet Surface

Remove all dirt, debris, and dust from surfaces before starting.

Pre-wet surfaces with fresh water before applying cleaner.

Pre-wet all plants or vegetation that is near the project.

Step 2 - Mix Cleaner

Mix 3/4 cup of Kleeners Choice™ per 1 gallon of lukewarm water.

Stir thoroughly for 5 minutes or until all powder is dissolved.

If not all the way dissolved, add more lukewarm water and continue stirring to help dissolve the powder.

Use the solution within 6 hours of mixing.

Step 3 - Apply & Wash

Apply solution using brush, mop, pump-up sprayer with safety relief valve, or chemical tank on pressure washer.

Let the cleaning Solution sit for 10 to 15 minutes before cleaning. Keep surface wet with cleaner, do NOT allow to dry!

Step 3 - Rinse

Rinse with a pressure washer using low to medium pressure, or a garden hose. A pressure washer is the preferred method of cleaning.